published date : feb 28, 2008 drawing no : sdsa6440 v1 checked : shin chi p.1/4 part number: ZFUR20A-A surface mount display www.sunled.com part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. ZFUR20A-A red gaasp/gap 1900 5990 627 common anode. rt. hand decimal absolute maximum ratings (ta=25c ) ur (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 ur (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.9 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 45 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c ) features 0.8 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package : 200pcs / reel. moisture sensitivity level : level 4. rohs compliant. preliminary spec notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3. the gap between the reflector and pcb shall not exceed 0.25mm. 4.specifications are subject to change without notice.
published date : feb 28, 2008 drawing no : sdsa6440 v1 checked : shin chi p.2/4 part number: ZFUR20A-A surface mount display www.sunled.com ? ur remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 28, 2008 drawing no : sdsa6440 v1 checked : shin chi p.3/4 part number: ZFUR20A-A surface mount display www.sunled.com ? tape specification (units : mm) ? recommended soldering patte rn (units : mm;tolerance: 0.15)
published date : feb 28, 2008 drawing no : sdsa6440 v1 checked : shin chi p.4/4 part number: ZFUR20A-A surface mount display www.sunled.com packing & label specifications ZFUR20A-A
|
